[Jul-2026] Huawei H31-411 Dumps - Secret To Pass in First Attempt
Huawei H31-411 Exam Dumps [2026] Practice Valid Exam Dumps Question
Huawei H31-411 (HCIA-LTE V1.0) certification is a valuable credential for professionals who work in the telecommunications industry. HCIA-LTE V1.0 certification exam validates the skills and knowledge required to plan, design, and deploy LTE networks using Huawei equipment.
Huawei H31-411 exam consists of 60 multiple-choice questions that must be completed within a time limit of 90 minutes. H31-411 exam covers a wide range of topics related to LTE technology, including the evolution of wireless communication, LTE network architecture and design, LTE interfaces and protocols, LTE network performance and optimization, and LTE security.
Preparing for the H31-411 exam requires a significant amount of study and practice. Candidates should have a solid understanding of LTE networks and the Huawei equipment used to deploy them. They should also be familiar with the latest industry standards and best practices for LTE network planning and optimization. With the right preparation, however, passing the H31-411 exam can be a rewarding and valuable achievement for professionals in the telecommunications industry.
NEW QUESTION # 22
In an LTE network, which of the following is the handover command sent by the eNodeB to the UE under the UU interface?
- A. Handover
- B. RRC Connection Reconfiguration
- C. Handover Request
- D. Handover Command
Answer: B
NEW QUESTION # 23
Which of the following formats are supported for LTE data configuration files to export? (Multiple choice)
- A. TXT
- B. XML
- C. DBS
- D. MML
Answer: B,C
NEW QUESTION # 24
The UMPT board is the master control board of the BBU3900 and must be inserted in slot 7 first.
- A. True
- B. False
Answer: B
NEW QUESTION # 25
What is the resource granularity of the PDCCH physical channel?
- A. CCH
- B. CCE
- C. CCM
- D. CCT
Answer: B
NEW QUESTION # 26
How many RE does an RB contain when using a regular CP?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 27
In LTE, the uplink pilot signal is used for E-UTRAN's and the UE's synchronization and uplink channel estimation.
- A. False
- B. True
Answer: B
NEW QUESTION # 28
Which of the following is not a function of eNodeB webLMT?
- A. Topology management
- B. Alarm management
- C. MML
- D. Signaling tracking
Answer: A
NEW QUESTION # 29
SRB1 can only be used to carry RRC signaling.
- A. True
- B. False
Answer: B
NEW QUESTION # 30
Which of the following statements is wrong?
- A. BCCH can be mapped to BCH
- B. DTCH map to MCH
- C. BCH BCCH can be mapped to DL-SCH
- D. CCCH map to DL-SCH
Answer: B
NEW QUESTION # 31
Which of the following statements about the power control in the LTE system are correct?
(Multiple choice)
- A. The purpose of power control is to save energy
- B. Power control is to ensure the quality of service
- C. Power control is one of the functions at the MAC layer
- D. Power control can improve coverage and capacity
Answer: A,B,D
NEW QUESTION # 32
When the number of RRU3151 series RRU cascade is more than 1 level, 2.5G optical module is changed to single-mode 6.144G optical module; original light module which less than or equal to
1 level can be still used.
- A. False
- B. True
Answer: B
NEW QUESTION # 33
When treating fault, if we can guarantee the fault can be solved, do not need to back up data.
- A. True
- B. False
Answer: B
NEW QUESTION # 34
Which of the following is the SERVER of the DHCP function of the network management server in the newly opened LTE site?
- A. Dedicated DHCP server
- B. CE
- C. OMC server
- D. MME
Answer: C
NEW QUESTION # 35
Which of the following cases may a mobile phone user be assigned a new GUTI? (Multiple choice)
- A. Cross MMETAupdate
- B. Attachment
- C. Taupdate in MME
- D. Paging
Answer: A,B,C
NEW QUESTION # 36
Which of the MIMO system gains listed below are obtained using the relative independence of spatial channel fading? (Multiple choice)
- A. Interference suppression gain
- B. Diversity gain
- C. Array gain
- D. Spatial multiplexing gain
Answer: B,D
NEW QUESTION # 37
Which of the following protocols is used between the eNodeB and the SGW?
- A. GTP-U
- B. S1-AP
- C. GTP-C
- D. PDCP
Answer: A
NEW QUESTION # 38
Which of the following interfaces apply the GTP-U protocol? (Multiple choice)
- A. S6a
- B. S11
- C. S1-U
- D. S5/S8
Answer: C,D
NEW QUESTION # 39
In LTE, the measurement report shows that the neighboring area RSRP is 47. Which of the following is the actual RSRP value of the neighboring area?
- A. -93dBm
- B. -83dBm
- C. -103dBm
- D. -73dBm
Answer: A
NEW QUESTION # 40
The working frequency band of a certain cell is 2570~2590MHz. Which of the following is the frequency point number of the cell when it is configured with a cell?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 41
Time division duplex (TDD) mobile communication systems require strict time synchronization.
- A. False
- B. True
Answer: B
NEW QUESTION # 42
Which interface's transmitted power of the following is EIRP?
- A. Antenna port
- B. RRU port
- C. Frame top port
- D. Feeder port
Answer: A
NEW QUESTION # 43
Which of the following information is the PHICH's configuration information broadcast?
- A. SIB3
- B. MIB
- C. SIB2
- D. SIB1
Answer: B
NEW QUESTION # 44
There are two types of radio bearer (RB) in an LTE system, SRB and DRB.
- A. False
- B. True
Answer: B
NEW QUESTION # 45
Which of the following wireless frame structures is used for TDD LTE?
- A. frame type 3
- B. frame type 1
- C. frame type 4
- D. frame type 2
Answer: D
NEW QUESTION # 46
......
H31-411 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions: https://freecert.test4sure.com/H31-411-exam-materials.html