2V0-41.20 Study Guide Brilliant 2V0-41.20 Exam Dumps PDF
View 2V0-41.20 Exam Question Dumps With Latest Demo
VMware 2V0-41.20 certification exam is a professional-level certification exam that focuses on VMware NSX-T Data Center software. It is designed for candidates who want to demonstrate their expertise in VMware NSX-T Data Center and earn a certification that validates their knowledge and skills. Professional VMware NSX-T Data Center certification exam covers a broad range of topics, including NSX-T Data Center architecture, installation and configuration, management, and troubleshooting.
NEW QUESTION # 53
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal
transport node?
- A. ifconfig
- B. ipconfig
- C. debug
- D. tcpdump
Answer: A
NEW QUESTION # 54
A company is deploying a NSX-T Data Center micro-segmentation in their vSphere environment to secure a simple application composed of web, app, and database tiers.
The naming convention will be:
* WKS-WEB-SRV-XXX
* WKY-APP-SRR-XXX
* WKI-DB-SRR-XXX
What is the optimal way to group them in order to enforce security policies from NSX-T Data Center?
- A. Use Edge as a firewall between tiers.
- B. Group all by means of tags membership.
- C. Create an Ethernet based security policy.
- D. Do a service insertion to accomplish the task.
Answer: B
NEW QUESTION # 55
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh show <VM Name> | grep interfaceid
- B. virsh list-interface <VM Name>
- C. virsh dumpxml <VM Name> | grep interfaceid
- D. virsh get-interface <VM Name>
Answer: C
Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION # 56
Which three services are compatible with VRF Lite? (Choose three.)
- A. NAT
- B. Intrusion Detection
- C. DHCP
- D. VPN
- E. Load Balancer
Answer: A,B,C
Explanation:
VRF Lite is not compatible with the following services:
-VPN
-Load Balancer
Taken from NSX-T ICM 3.0 Lecture Manual.
NEW QUESTION # 57
Which two statements are true for a Tier-1 Gateway? (Choose two.)
- A. always configured in active-standby mode
- B. connects to physical networks
- C. owned and configured by Service Provider
- D. owned and configured by the Tenant
- E. supports ECMP
Answer: A,B
NEW QUESTION # 58
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. can contain multiple types of edge nodes (VM or bare metal)
- B. must contain only one type of edge nodes (VM or bare metal)
- C. can have a maximum of 8 edge nodes
- D. can have a maximum of 10 edge nodes
- E. must have only active-active edge nodes
Answer: A,D
Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62-8E8D-43CC-92E0-E8D72E198D5A.html
NEW QUESTION # 59
Which command is used to change the NSX CU administrator password?
- A. set user administrator password <password> old-password <old-password> To change the password of an account run: set user admin password my-new-pwd old-password my-old-pwd
- B. set user admin password <old-password> <new-password>
- C. set user administrator password <old-password> <new-password>
- D. set user admin password <password> old-password <old-password>
Answer: D
NEW QUESTION # 60
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh show <VM Name> | grep interfaceid
- B. virsh list-interface <VM Name>
- C. virsh dumpxml <VM Name> | grep interfaceid
- D. virsh get-interface <VM Name>
Answer: C
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION # 61
Which log is used to see a failed NSX-T installation of a VIB package on ESXi transport nodes?
- A. /var/log/syslog.log
- B. /var/log/vmware/eam/eam.log
- C. /var/l og/hostd. log
- D. /var/log/esxupdate.log
Answer: A
NEW QUESTION # 62
Which component does the hyperbus interface (vmk50) provide network connectivity to?
- A. virtual machines running in the same segment
- B. virtual machines running on the same hypervisor
- C. virtual machines and containers running across transport nodes
- D. containers running on ESXi/KVM transport nodes
Answer: D
NEW QUESTION # 63
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. can contain multiple types of edge nodes (VM or bare metal)
- B. must contain only one type of edge nodes (VM or bare metal)
- C. can have a maximum of 8 edge nodes
- D. can have a maximum of 10 edge nodes
- E. must have only active-active edge nodes
Answer: A,D
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62-8E8D-43CC-92E0-
NEW QUESTION # 64
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service manager log-level debug
- B. set service manager logging-level debug
- C. set service nsx-manager log-level debug
- D. set service nsx-manager logging-level debug
Answer: B
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html
NEW QUESTION # 65
What are two types of supported IPSec VPNs in NSX-T Data Center? (Choose two.)
- A. Layer-7 based IPSec VPN
- B. route-based IPSec VPN
- C. policy-based IPSec VPN
- D. SSL based IPSec VPN
- E. Open source based IPSec VPN
Answer: B,C
NEW QUESTION # 66
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the GENEVE protocol on the ESXi transport node? (Choose two.)
- A. esxcli network nic list
- B. esxcfg-nics -1
- C. esxcfg-vmknic -1
- D. esxcli network ip interface ipv4 get
- E. net-dvs
Answer: C,D
NEW QUESTION # 67
Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)
- A. SSH
- B. TLS
- C. TCP
- D. HTTPS
- E. SSL
- F. UDP
Answer: B,C,F
Explanation:
Reference:
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/certification/vmware-2vo-41.20-exam-prep-guide.pdf
NEW QUESTION # 68
An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time.
Which CLI command disables the nsxcli time out value on NSX Manager?
- A. set cli-timeout 1
- B. set cli-timeout disabled
- C. set cli-timeout enabled
- D. set cli-timeout 0
Answer: D
Explanation:
" https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#set%20cli-timeout%20%3Ctimeout%3E
https://www.virten.net/2020/06/quick-tip-remove-nsx-t-ssh-and-http-session-timeout/
NEW QUESTION # 69
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hair pinning?
- A. Place a partner SVM on each compute cluster node.
- B. Create a secondary vNIC on each quest VM for SVM communication.
- C. Add partner SVMs to an edge cluster.
"For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster." - D. Centralize partner SVMs in a service cluster.
Answer: A
NEW QUESTION # 70
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh show <VM Name> | grep interfaceid
- B. virsh list-interface <VM Name>
- C. virsh dumpxml <VM Name> | grep interfaceid
- D. virsh get-interface <VM Name>
Answer: C
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION # 71
In a NSX-T Data Center environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.
Which two actions could address low throughput and congestion? (Choose two.)
- A. Configure a Tier-1 gateway and connect it directly to the physical routers.
- B. Add an additional vNIC to the NSX Edge node.
- C. Configure ECMP on the Tier-0 gateway.
- D. Deploy Large size Edge node/s.
- E. Configure NAT on the Tier-0 gateway.
Answer: C,D
NEW QUESTION # 72
......
VMware 2V0-41.20 exam is a challenging exam that requires a good understanding of NSX-T Data Center architecture, installation, configuration, and management. 2V0-41.20 exam covers a wide range of topics, including NSX-T Data Center components, NSX-T Data Center installation and configuration, NSX-T Data Center management and administration, NSX-T Data Center security, and NSX-T Data Center troubleshooting.
Free 2V0-41.20 Test Questions Real Practice Test Questions: https://freecert.test4sure.com/2V0-41.20-exam-materials.html