A10 Networks A10-System-Administration Dumps - The Sure Way To Pass Exam
A10-System-Administration Exam Questions (Updated 2023) 100% Real Question Answers
A10 Networks A10-System-Administration certification exam is designed to test the skills and knowledge necessary for IT professionals to administer and manage A10 Networks products and solutions. A10 Certified Professional System Administration 4 certification is ideal for IT professionals who are responsible for configuring, deploying, and maintaining A10 Networks systems in their organization. The A10-System-Administration exam covers a wide range of topics including installation, configuration, management, troubleshooting, and security of A10 Networks products.
The A10-System-Administration certification exam is an excellent way for IT professionals to demonstrate their expertise in managing and administering A10 Networks products. By earning this certification, candidates can differentiate themselves from their peers and demonstrate their commitment to professional development and continuous learning in the field of network administration.
NEW QUESTION # 17
When vBlade A issues a "vcs vmaster-take-over 200" command, which statement is true?
- A. The 200 priority is compared to the current vmaster's default vrid priority to determine which device controls the chassis.
- B. The command is ignored when the current vMaster is in vMaster maintenance mode.
- C. Any subsequent vmaster-take-over command within the chassis with a parameter smaller than 201 is ignored.
- D. If an administrator on vBlade B were to simultaneously issue command vcs vmaster-take-over 210, vBlade B would become the vMaster.
Answer: A
NEW QUESTION # 18
How are aVCS changes that are performed on the vMaster pushed to the vBlades?
- A. VRRP-A should be failed over
- B. aVCS reload has to be performed
- C. HA Sync needs to be done
- D. Automatically
Answer: D
NEW QUESTION # 19
Select two aXAPI implementation use cases. (Choose two.)
- A. Perform deep packet inspection on traffic and redirect and modify content.
- B. Extract ACOS configurations or statistics from ACOS.
- C. Writing scripts to automate configuration changes.
- D. Auto-syncing the configurations via virtual chassis.
Answer: B,C
NEW QUESTION # 20
Which statement correctly describes the result of the following commands?
ACOS(config)#logging host 192.168.216.45
ACOs(config)#end
ACOS#active-partition p1
Currently active partition: p1
ACOS[p1](config)#logging host 2.2.2.2
ACOS[p1](config)#logging host partition shared
- A. System logs generated from partition "p1" will be sent to logging server "2.2.2.2".
- B. System logs generated from partition "p1" will be sent to logging server "2.2.2.2", as well as to the shared logging server's "192.168.216.45".
- C. System logs generated from partition "p1" will be sent to the shared logging server's "192.168.216.45".
- D. System logs generated from partition "p1" will be sent to logging server "2.2.2.2", and only warning severity log messages are sent to the shared logging server's "192.168.216.45".
Answer: B
NEW QUESTION # 21
Which statement is true about the requirements for ACOS devices that are part of an aVCS cluster?
- A. Devices must be the same model but can have different optional hardware cards
- B. Devices must be the same model and have the same optional hardware cards
- C. Any Thunder series devices can be clustered together in an aVCS set
Answer: B
NEW QUESTION # 22
Which commands display the ACOS device serial number? (Choose two.)
- A. show serial
- B. show version
- C. show system
- D. show environment
- E. show hardware
Answer: B,E
NEW QUESTION # 23
Device 1 is the vMaster in a virtual chassis. Select the command set that adds an IP address to VE interface
200 on device 3?
- A. interface ve 200 device 3 ip address 198.162.4.1 /24
- B. interface device-context 3 interface ve 200 ip address 198.162.4.1 /24
- C. interface ve 3/200 ip address 198.162.4.1 /24
- D. vcs device-context device 3 interface ve 200 ip address 198.162.4.1 /24
Answer: C
NEW QUESTION # 24
ACOS can log the following accounting records for administrative sessions:
- A. command entry attempts only
- B. device access attempts only
- C. syslog errors of a specified severity level
- D. device access and command entry attempts
- E. syslog errors of severity greater than a specified level
Answer: D
NEW QUESTION # 25
What information is typically submitted with every aXAPI call after the initial login is complete?
- A. Log file location
- B. The ACOS device serial number
- C. Authorization header with signature
- D. The AXAPI special permission XML file
- E. The programming language being used
Answer: C
NEW QUESTION # 26
What is the purpose of a VRRP-A floating-IP address?
- A. To serve as a tie-breaker when selecting a VRRP-A owner.
- B. To provide a single IP to manage all VRRP-A devices in the set.
- C. To provide a single next hop IP address for uplink and downlink devices.
- D. To use as source IP address for VRRP-A hellos.
Answer: C
NEW QUESTION # 27
Describe VRRP-A (high availability) and aVCS interoperability.
- A. VRRP-A and aVCS operate independently of each other
- B. Enabling VRRP-A requires that aVCS is operational
- C. Enabling aVCS require VRRP-A is operational
- D. VRRP-A and aVCS must function simultaneously
Answer: D
NEW QUESTION # 28
When VRRP-A is enabled on a device with multiple partitions, which statement about VRID 0 is correct?
- A. VRID 0 only exists in the shared partition; private partitions can only contain VRIDs numbered higher than 0.
- B. VRID 0 is initially enabled only in the shared partition; partition administrators can enable VRID 0 in their partitions.
- C. Each partition has its own distinct VRID 0.
- D. When using VRRP-A on a device with multiple partitions, VRID 0 is automatically disabled.
Answer: C
NEW QUESTION # 29
......
Pass A10 Networks A10-System-Administration Exam Quickly With Test4Sure: https://freecert.test4sure.com/A10-System-Administration-exam-materials.html