H19-424_V1.0 Exam Dumps - Try Best H19-424_V1.0 Exam Questions from Training Expert Test4Sure
Practice Examples and Dumps & Tips for 2024 Latest H19-424_V1.0 Valid Tests Dumps
NEW QUESTION # 10
Regarding the principle of VN division, the following statement is wrong
- A. In a virtualized network, different service networks can be distinguished by different VNs
- B. Virtual networks are isolated from each other by default
- C. Independent business units can be used as a separate virtual network
- D. The isolation requirements caused by the difference of user identities in the same department can be realized by dividing different virtual networks
Answer: D
NEW QUESTION # 11
The description of the main function of the configuration translation tool is correct ()
- A. All of the above statements are correct
- B. Used in relocation scenarios, this tool can restore the user's existing network networking status and service characteristics information
- C. It is used in relocation scenarios, mainly used to translate the configuration of friends in batches and improve the efficiency of relocation
- D. It is used in relocation scenarios, mainly used to formulate relocation plans and design the networking structure of new networks
Answer: C
NEW QUESTION # 12
Which of the following configurations does not belong to the global configuration content of the LAN
&WVAN convergence solution ()
- A. WAN network type
- B. IPSec encryption parameters
- C. WAN BGP routing
- D. Virtual network address pool
Answer: C
NEW QUESTION # 13
Which of the following descriptions is wrong about the MPLS tuning scheme ()
- A. When multiple load-balancing tunnels are deployed between two PE nodes, we recommend that you deploy a detached group.
- B. RSVP-TE, SR-TE, and LDP tunnels can be tuned
- C. When optimizing and calculating routes, priority is given to ensuring the creation of high-priority tunnels, and high-priority tunnels can preempt low-priority tunnel resources
- D. It is recommended to deploy two-way tunnels to pass through the common road, which is convenient for maintenance and more reliable tunnel BFD detection
Answer: B
NEW QUESTION # 14
The description of the V300R022C10 version of NetEngine AR6300 SRG33X0 series enterprise routers is incorrect
- A. The maximum number of XSIC slots can reach 4.
- B. 4 SIC slots.
- C. The maximum number of WSIC slots can reach 4.
- D. Dual master control and double forwarding
Answer: A
NEW QUESTION # 15
Regarding planning and design tools, the following statements are wrong
- A. When the equipment model cannot be used, you can feedback it in the tool platform
- B. The tool can ensure the logical consistency and data consistency of the design
- C. In the case of large or frequent changes in the network, the old project can be retained and the new project can be designed
- D. The planning and design tool is used for after-sales planning and cannot be used before sales
Answer: D
NEW QUESTION # 16
The maximum channel bandwidth supported by WIFI6 is:
- A. 640M
- B. 80M
- C. 160M
- D. 320M
Answer: C
NEW QUESTION # 17
Where can I modify the size and line thickness of the AP icon in the WLANPlanner tool ()
- A. Scene settings
- B. Resources have been planned
- C. Set the display items
- D. Global settings
Answer: C
NEW QUESTION # 18
The statement about cloud AP radio tuning is incorrect
- A. If the specifications are exceeded, if APs are not grouped, APs will be randomly grouped, and adjacent APs and APs on the same floor may be assigned to different groups, which will affect global services such as tuning and load balancing
- B. Global services such as local load tuning and load balancing of the LeaderAP are limited by the performance of the AP, and the specifications of the APs that can be managed by theLeaderAP are limited
- C. The AP tuning group division will be reflected on the controller of the current version
- D. AP groups in the current version are grouped through AP management VLANs, and APs in the same group need to have the same management VLANs
Answer: C
NEW QUESTION # 19
Ethernet Segment Route(Type4)
- A. MAC address learning Xi notice
- B. Elastic search for ES members
- C. Multicast tunnel endpoint auto-discovery & multicast type auto-discovery
- D. IPPrefix announcement
Answer: B
NEW QUESTION # 20
In iMaster NCE-Campus V300R022C00, the function description of the distributed switch (remote module) scenario is incorrect ()
- A. Management capability: You can view the information of the distributed switch based on the central switch, including the ESN, model, online status, interface directly connected to the central switch, and the port list information of the distributed switch itself.
- B. O&M capability: support restart operations on distributed switches: support reporting alarms for failed upgrade of distributed switches. Control capability: Configurations can be directly delivered to distributed switches (remote modules).
- C. Control capability: support direct configuration delivery to distributed switches (remote modules).
- D. Monitoring capability: You can view the memory usage, storage space usage, and temperature of distributed switches, as well as the running status, rate, flow rate, packet statistics, and bandwidth utilization of distributed switch ports.
Answer: C
NEW QUESTION # 21
The source of policy generation does not include ()
- A. IGP
- B. BGP
- C. CLI/Netconf/yang
- D. PCEP
Answer: A
NEW QUESTION # 22
What kind of service nodes are not included in the cloud management platform controller cluster?
- A. Register the inquiry center
- B. Device management node ACM
- C. Data acquisition node ACC
- D. Authentication node ACA
- E. Data processing node FI
Answer: A
NEW QUESTION # 23
In order to quickly recover when the configuration is lost, which of the following operations is recommended?
- A. Manually save the equipment configuration on the controller on a regular basis
- B. Formulate regular configuration file backup tasks
Answer: B
NEW QUESTION # 24
Which of the following protocols does the iMaster NCE-Campus controller use to report device performance data?
- A. HTTP2.0
- B. HTTPS
- C. HTTP
- D. Netconf
Answer: A
NEW QUESTION # 25
When using the planning and design tool, the following statement is wrong about the layout of the campus network cabinet
- A. The server cannot be planned and placed in the cabinet
- B. Modular switches support board design
- C. Drag and drop to adjust the position of the device
- D. There are two views: logical cabinet and physical cabinet
Answer: A
NEW QUESTION # 26
For the description of the WLAN network planning scheme in the dormitory/hotel one-in-two scene with a bathroom at the door, the correct one is ()
- A. The AP fixes the radio power and configures the maximum EIRP to improve the downlink coverage of the room through the wall, with the worst 5G downlink RSSI being -65dBm and the worst uplink RSSI being -80dBm
- B. Select butterfly wing wave AP wall-mounted bathroom corner, height 2.2~2.5m, a single AP covers the left and right 2 rooms
- C. The bathroom relies on 5G for coverage and turns off 2.4G
- D. Indoor omnidirectional APs (2*2 models such as 5761-11) are deployed separately in the corridor to ensure roaming continuity
Answer: C
NEW QUESTION # 27
For the sake of WLAN security, if the customer wants to manage the WLAN data in a unified manner, the customer can choose which of the following networking methods:
- A. Layer 2 networking data is forwarded directly
- B. AC side-attached data is forwarded directly
- C. AC side-attached data tunnel forwarding
- D. Layer 3 networking data is forwarded directly
Answer: C
NEW QUESTION # 28
In the network plan of iMaster NCE-Campus, what is the recommended networking mode if there is no special isolation requirement??
- A. Two-plane networking
- B. Four-plane networking
- C. Three-plane networking
Answer: A
NEW QUESTION # 29
Which of the following statements is correct for the user requirements for configuring the translation tool ()
- A. I have a relatively high education, and I can solve problems by myself and can use them
- B. If you already have a tool, you can fully trust the tool, and you don't need special skills
- C. The tool is simple, and I have two years of work experience, so there is no problem with it
- D. Have systematic and professional knowledge of data communication network, and have more than two years of experience in data communication equipment development and maintenance
Answer: D
NEW QUESTION # 30
......
Latest 100% Passing Guarantee - Brilliant H19-424_V1.0 Exam Questions PDF: https://freecert.test4sure.com/H19-424_V1.0-exam-materials.html