Pass Your HPE6-A72 Exam Easily - Real HPE6-A72 Practice Dump Updated Jul 22, 2023
2023 Realistic Verified Free HP HPE6-A72 Exam Questions
NEW QUESTION # 32
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.
Answer:
Explanation:
NEW QUESTION # 33
What are the commands to disable SSH and HTTPS services from the default VRF?
- A. Core-1(config)# no ssh server vrf default
Core-1(config)# no https-server vrf default - B. Core-1# no ssh server vrf default
Core-1# no https-server vrf default - C. Core-1(config)# no ssh server
Core-1(config)# no https-server - D. Core-1(config)# no ssh server enable
Core-1(config)# no https-server enable
Answer: A
NEW QUESTION # 34
Which two options are the Layer 2 protocols? (Choose two.)
- A. STP
- B. 802.11af
- C. RIP
- D. 802.1Q
- E. IPSec
Answer: A,D
NEW QUESTION # 35
What is the correct description of a Multi-Layer Switch?
- A. a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence
- B. multi-Layer refers specifically to using chassis switches with several line cards over stack port switches
- C. any switch that supports PoE, LLDP-MED and Flow Control
- D. has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router
Answer: D
NEW QUESTION # 36
Which statement is true regarding modern switching requirements?
- A. Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today's power-over-Ethernet needs.
- B. While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed.
- C. Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for IoT devices are usually addressed using default wired encryption that all 802.3 Ethernet switches provide.
- D. Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of IoT devices that require security and port authentication options.
Answer: D
NEW QUESTION # 37
What is the login and password combination is used when first configuring an Aruba OS-CX switch from factory defaults?
- A. Login admin and password password.
- B. Login admin and password forgetme!
- C. Login admin and password admin.
- D. Login admin and password field empty.
Answer: D
NEW QUESTION # 38
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)
- A. is the first WLAN standard to no longer use electromagnetic signals to transmit data
- B. operates only in the 5GHz similar to 802.11ac
- C. allows transmissions of up to 4.8Gbps
- D. operates in both the 2.4GHz and 5GHz radios bands
- E. is an emerging satellite connection standard to allow wireless access anywhere in the world
Answer: C,D
Explanation:
Explanation/Reference:
NEW QUESTION # 39
Match each network protocol to the correct default listening port and transport protocol. Not all answers will be used.
Answer:
Explanation:
NEW QUESTION # 40
What are two methods for remotely managing an Aruba AOS-CX switch? (Choose two.)
- A. USB-C console
- B. Telnet
- C. HTTPS
- D. SSH
- E. SNMPv2c
Answer: C,D
NEW QUESTION # 41
Which two options are the Layer 3 Routing protocols? (Choose two.)
- A. OSPF
- B. 802.3ad
- C. BGP
- D. LLDP
- E. MPLS
Answer: A,C
NEW QUESTION # 42
What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?
- A. backup secondary sftp://[email protected]/GL.10.04.0003.swi
- B. copy secondary sftp://[email protected]/GL.10.04.0003.swi
- C. copy secondary tftp://[email protected]/GL.10.04.0003.swi
- D. copy sftp://[email protected]/GL.10.04.0003.swi secondary
Answer: B
NEW QUESTION # 43
Which network category applies to a SOHO internal network?
- A. LAN
- B. SD-WAN
- C. WAN
- D. Internet
Answer: D
NEW QUESTION # 44
What connectivity commands are available on AOS-CX switches? (Choose two.)
- A. traceroute
- B. netstatus
- C. ping
- D. pathping
- E. tracert
Answer: A,C
NEW QUESTION # 45
Which Ethernet port combination does the Aruba 5400R ZL2 switch series support?
- A. Gigabit Ethernet, 25 Gigabit Ethernet, and 40 Gigabit Ethernet
- B. 10/100 Megabit Ethernet, Gigabit Ethernet, 25 Gigabit Ethernet, and 100 Gigabit Ethernet
- C. 10/100 Megabit Ethernet, Gigabit Ethernet, and 100 Gigabit Ethernet
- D. 10/100 Megabit Ethernet, Gigabit Ethernet, and 40 Gigabit Ethernet
Answer: D
NEW QUESTION # 46
Refer to the exhibit.
What command (output shown above) gives the optics serial number and part number information?
- A. show interface transceiver
- B. show interface physical
- C. show interface optics
- D. show inventory
Answer: A
NEW QUESTION # 47
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization.
What command should be used to enable terminal output line by line or page by page?
- A. The command less
- B. The command more
- C. The command page
- D. The command terminal length 30
Answer: C
NEW QUESTION # 48
Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.
Answer:
Explanation:
NEW QUESTION # 49
Refer to the exhibit.
Which command produces the above output?
- A. show interface port 1/1/10 switchport
- B. show trunk port 1/1/10 extended
- C. show vlan port 1/1/10
- D. show interface port 1/1/10 trunk
Answer: B
NEW QUESTION # 50
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?
- A. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
- B. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
- C. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
- D. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
Answer: A
NEW QUESTION # 51
Refer to the exhibit.
What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface?
- A. Use the command ping 10.1.1.254 vrf mgmt
- B. The destination 10.1.1.254 requires configuring a static route
- C. Use the command ping 10.1.1.254/24
- D. Change the Core-1 management address to 10.1.1.1/25 first
Answer: A
NEW QUESTION # 52
......
HPE6-A72 Real Exam Questions and Answers FREE: https://freecert.test4sure.com/HPE6-A72-exam-materials.html