Maximum Grades By Making ready With NSE5_FNC_AD-7.6 Dumps UPDATED 2026
Prepare NSE5_FNC_AD-7.6 Exam Questions [2026] Recently Updated Questions
NEW QUESTION # 22
An administrator manages a corporate environment where all users log into the corporate domain each time they connect to the network. The administrator wants to leverage login scripts to use a FortiNAC-F agent to enhance endpoint visibility Which agent can be deployed as part of a login script?
- A. Persistent
- B. Dissolvable
- C. Passive
- D. Mobile
Answer: B
Explanation:
The dissolvable agent is designed to be executed at user login and does not require permanent installation on the endpoint. This makes it suitable for deployment through domain login scripts, where it can run temporarily to collect endpoint posture and visibility information and then remove itself after execution.
NEW QUESTION # 23
An administrator wants each department to create and manage its own contractor accounts but not be able to manage contractor accounts for other departments.
What must the administrator configure to limit the sponsor's capabilities?
- A. The portal settings on the kiosk portal page
- B. The sponsor's administrative profile
- C. The user/host profile applied to the contractor
- D. The contractor's template
Answer: B
Explanation:
The sponsor's administrative profile defines the scope of management permissions, including which accounts they can create, view, and modify. By restricting the administrative profile to a specific department, each sponsor can manage only their own department's contractor accounts and not those of other departments.
NEW QUESTION # 24
During an evaluation of state-based enforcement, an administrator discovers that ports that should not be under enforcement have been added to enforcement groups.
In which view would the administrator be able to identify who added the ports to the groups?
- A. The Port Changes view
- B. The Event Management view
- C. The Admin Auditing view
- D. The Security Events view
Answer: C
Explanation:
In FortiNAC-F, accountability and forensic tracking of configuration changes are managed through the Admin Auditing functionality. When an administrator performs an action that modifies the system state--such as creating a policy, changing a device's status, or adding a switch port to an Enforcement Group--the system generates an audit record. This record is essential for troubleshooting scenarios where unauthorized or accidental configuration changes have occurred, leading to unintended network behavior.
The Admin Auditing view (found under Logs > Admin Auditing) provides a comprehensive log of the "Who, What, and When" for every administrative session. Each entry includes the username of the administrator, the source IP address from which they accessed the FortiNAC-F console, a precise timestamp, and a detailed description of the modification. In the scenario described, where port have been incorrectly added to enforcement groups, the Admin Auditing view allows a supervisor to filter by the specific "Port" or "Group" object to identify exactly which administrator executed the command.
NEW QUESTION # 25
An administrator wants to continually monitor endpoints for the existence of a specific registry key and the status of a required security service.
Which two requirements must be in place for the administrator to use FortiNAC-F compliance monitors? (Choose two.)
- A. Remediation admin scan
- B. Custom scan
- C. Persistent agent
- D. MDM integration
Answer: B,C
Explanation:
Compliance monitors require the persistent agent to continuously evaluate endpoint conditions such as registry keys and service status. A custom scan must be defined to specify the exact registry key and security service checks that the monitor will assess on the endpoint.
NEW QUESTION # 26
Refer to the exhibit. An administrator has configured the DHCP scope for a registration isolation network, but the isolation process isn't working.
What is the problem with the configuration?
- A. The lease pool does not contain a complete subnet.
- B. The gateway defined for the scope is incorrect.
- C. The label uses a system-reserved value.
- D. The domain name server designation is incorrect.
Answer: B
Explanation:
In a FortiNAC-F deployment, the configuration of the DHCP scope for isolation networks (Registration, Remediation, etc.) must perfectly align with the underlying network infrastructure to ensure that isolated hosts can communicate with the FortiNAC appliance. In the provided exhibits, there is a clear discrepancy between the DHCP configuration and the Network Topology.
As shown in the "Network Topology" exhibit, the Registration Network resides on a router interface (or sub-interface) with the IP address 192.168.180.1. This address represents the default gateway for any host placed into the Registration VLAN. However, the "DHCP configuration" exhibit shows the scope "REG-ScopeOne" configured with a Gateway of
10.0.1.254. This 10.0.1.254 address belongs to the management/service network (port2 of FortiNAC), not the registration subnet. If a host in the Registration VLAN receives this incorrect gateway via DHCP, it will attempt to send all off-link traffic to an unreachable IP, preventing it from loading the Captive Portal or communicating with the FortiNAC server.
According to the FortiNAC-F Configuration Wizard Reference, when defining a Layer 3 network scope, the "Gateway" field must contain the IP address of the router interface that acts as the gateway for that specific isolation VLAN. The FortiNAC appliance itself usually sits on a different subnet, and traffic is directed to it via the router's DHCP Relay (IP Helper) and DNS redirection.
"When configuring scopes for a Layer 3 network, the Gateway value must be the IP address of the router interface for that subnet. This allows the host to reach its local gateway to route traffic.
If the gateway is misconfigured, the host will be unable to reach the FortiNAC eth1/port2 interface for registration... Ensure the Gateway matches the network topology for the isolation VLAN."
NEW QUESTION # 27
As part of a FortiNAC-F integration with FortiGate for management of VPN users, what must be configured on FortiGate to keep FortiNAC-F up to date with VPN session information?
- A. Syslog messages
- B. Security Fabric integration
- C. RADIUS accounting
- D. SNMP traps
Answer: C
Explanation:
RADIUS accounting must be enabled on FortiGate so it sends session start and stop records to FortiNAC-F. These accounting messages provide real-time VPN session status updates, allowing FortiNAC-F to track user connections and enforce appropriate network access policies.
NEW QUESTION # 28
Refer to the exhibit. If a host is connected to a port in the Building 1 First Floor Ports group, what must also be true to match this user/host profile?
- A. The host must have a role value of contractor or an installed persistent agent and a security access value of contractor, and be connected between 6 AM and 5 PM.
- B. The host must have a role value of contractor or an installed persistent agent or a security access value of contractor, and be connected between 6 AM and 5 PM.
- C. The host must have a role value of contractor, an installed persistent agent or a security access value of contractor, and be connected between 6 AM and 5 PM.
- D. The host must have a role value of contractor or an installed persistent agent, a security access value of contractor, and be connected between 9 AM and 5 PM.
Answer: A
Explanation:
The User/Host Profile in FortiNAC-F is the fundamental logic engine used to categorize endpoints for policy assignment. As seen in the exhibit, the configuration uses a combination of Boolean logic operators (OR and AND) to define the "Who/What" attributes.
According to the FortiNAC-F Administrator Guide, attributes grouped together within the same bracket or connected by an OR operator require only one of those conditions to be met. In the exhibit, the first two attributes are "Host Role = Contractor" OR "Host Persistent Agent = Yes".
This forms a single logical block. This block is then joined to the third attribute ("Host Security Access Value = Contractor") by an AND operator. Consequently, a host must satisfy at least one of the first two conditions AND satisfy the third condition to match the "Who/What" section.
Furthermore, the profile includes Location and When (time) constraints. The exhibit shows the location is restricted to the "Building 1 First Floor Ports" group. The "When" schedule is explicitly set to Mon-Fri 6:00 AM - 5:00 PM. For a profile to match, all enabled sections (Who/What, Locations, and When) must be satisfied simultaneously. Therefore, the host must meet the conditional contractor/agent criteria, possess the specific security access value, and connect during the defined 6 AM to 5 PM window.
"User/Host Profiles use a combination of attributes to identify a match. Attributes joined by OR require any one to be true, while attributes joined by AND must all be true. If a Schedule (When) is applied, the host must also connect within the specified timeframe for the profile to be considered a match. All criteria in the Who/What, Where, and When sections are cumulative."
NEW QUESTION # 29
Which two requirements must be met to set up an N+1 HA cluster? (Choose two.)
- A. A dedicated VLAN for primary and secondary synchronization
- B. A FortiNAC-F manager
- C. At least two FortiNAC-F devices designated as primary
- D. A FortiNAC-F device designated as a secondary
Answer: B,D
Explanation:
The N+1 High Availability (HA) architecture was introduced in FortiNAC-F version 7.6 to provide a more scalable and flexible redundancy model compared to the traditional 1+1 active/passive setup.
In an N+1 configuration, a single secondary (standby) appliance can provide coverage for multiple primary (active) Control and Application (CA) appliances.
To set up an N+1 HA cluster, there are two fundamental structural requirements:
A FortiNAC-F Manager (FortiNAC-M): Unlike standard 1+1 HA, which can be configured directly between two CAs, N+1 management is centralized. The FortiNAC-M acts as the orchestrator that manages the failover groups, monitors the health of the primaries, and coordinates the promotion of the secondary server if a primary fails.
A FortiNAC-F device designated as a Secondary: The cluster must have one appliance explicitly configured with the Secondary failover role. This device remains in a standby state, receiving database replications from all N primaries in its group until it is called upon to take over the functions of a failed unit
NEW QUESTION # 30
When creating a user or host profile, which three criteria can you apply? (Choose three.)
- A. An applied access policy
- B. Location
- C. Host or user attributes
- D. Adapter current VLAN
- E. Host or user group memberships
Answer: B,C,E
Explanation:
The User/Host Profile is the primary mechanism in FortiNAC-F for identifying and categorizing endpoints to determine their level of network access. According to the FortiNAC-F Administration Guide, a profile is built using a combination of criteria that define "Who" is connecting, "What" device they are using, and "Where" they are located on the network.
The three main categories of criteria available in the configuration are:
Host or User Attributes (B): This includes specific details such as the host's operating system, the user's role (e.g., Employee, Contractor), or custom attributes assigned to the record.
Host or User Group Memberships (A): Profiles can be configured to match endpoints that are members of specific internal FortiNAC groups or synchronized directory groups (like LDAP or Active Directory groups). This allows for broad policy application based on organizational structure.
Location (E): The "Where" component allows administrators to restrict a profile match to specific physical or logical areas of the network, such as a particular switch, a group of ports, or a specific SSID.
NEW QUESTION # 31
Refer to the exhibits.
An administrator is troubleshooting visibility issues on a modeled switch. The switch is configured to use link traps and to provision hosts based on network access policies. The administrator is seeing hosts on ports with no hosts connected and not seeing hosts on ports where hosts are known to be connected.
What is the most likely cause?
- A. The credentials are incorrect.
- B. The host has uninstalled the FortiNAC-F agent.
- C. The switch cannot be contacted by FortiNAC-F.
- D. The logical networks are set to deny.
Answer: A
Explanation:
Incorrect switch credentials prevent FortiNAC-F from successfully performing SNMP-based polling (such as layer 2 host learning) needed to accurately learn and clear hosts per port. As a result, FortiNAC-F displays stale or missing host-to-port associations even though link traps are enabled.
NEW QUESTION # 32
Which two things must be done to allow FortiNAC to process incoming syslog messages from an unknown vendor? (Choose two.)
- A. The device sending the messages must be modeled in the Network Inventory view.
- B. The device must be added as a patch management server.
- C. The device must be added as a log receiver.
- D. A security event parser must be created for the device.
Answer: C,D
NEW QUESTION # 33
An administrator wants to use FortiNAC-F to prevent internal engineers from accessing specific websites as defined in web filter categories on FortiGate.
In addition to a security trigger and associated action, which configuration must also be defined on FortiNAC-F?
- A. A compliance policy
- B. A firewall policy
- C. A profiling method
- D. A user/host profile
Answer: D
Explanation:
To enforce restrictions based on web filter categories for internal engineers, FortiNAC-F must identify and group those users or their devices. A user/host profile defines the specific users or hosts (such as internal engineers) to which the security trigger and associated action will apply, enabling targeted enforcement.
NEW QUESTION # 34
A network administrator is troubleshooting a network access issue for a specific host. The administrator suspects the host is being assigned a different network access policy than expected.
Where would the administrator look to identify which network access policy, if any, is being applied to a particular host?
- A. The Port Properties view of the hosts port
- B. The Policy Logs view
- C. The Connections view
- D. The Policy Details view for the host
Answer: D
Explanation:
When troubleshooting network access in FortiNAC-F, it is often necessary to verify exactly why a host has been granted a specific level of access. Since FortiNAC-F evaluates policies from the top down and assigns access based on the first match, an administrator needs a clear way to see the results of this evaluation for a specific live endpoint.
The Policy Details (C) view is the designated tool for this purpose. By navigating to the Hosts > Hosts (or Adapter View) in the Administration UI, an administrator can search for the specific MAC address or IP of the host in question. Right-clicking on the host record reveals a context menu from which Policy Details can be selected. This view provides a real-time "look" into the policy engine's decision for that specific host, showing the Network Access Policy that was matched, the User/Host Profile that triggered the match, and the resulting Network Access Configuration (VLAN/ACL) currently applied.
NEW QUESTION # 35
Refer to the exhibit.
When configuring guest access using a network access policy, where would an administrator configure the Guest-VLAN value?
- A. In the User/Host profile
- B. In the Guest portal configuration
- C. In the Guest template
- D. In the Model configuration
Answer: D
Explanation:
The Guest-VLAN value is defined within the switch Model configuration, where VLAN mappings and enforcement actions are configured. The network access policy references this configuration to apply the appropriate VLAN when the policy conditions are met.
NEW QUESTION # 36
When configuring isolation networks in the configuration wizard, why does a layer 3 network type allow for more than one DHCP scope for each isolation network type?
- A. Any scopes beyond the first scope are used if the initial scope runs out of IP addresses.
- B. There can be more than one isolation network of each type
- C. The layer 3 network type allows for one scope for each possible host status.
- D. Configuring more than one DHCP scope allows for DHCP server redundancy
Answer: B
Explanation:
With a layer 3 isolation network type, FortiNAC-F supports multiple isolation networks of the same type, each with its own routed subnet. This design allows administrators to define more than one DHCP scope per isolation network type to accommodate multiple layer 3 isolation segments.
NEW QUESTION # 37
When managing multiple FortiNAC-F CAs with a FortiNAC-F manager, how is endpoint information updated in the FortiNAC-F manager database?
- A. Endpoint information is updated when an administrator synchronizes with each CA.
- B. Endpoint information is pushed to the FortiNAC-F manager based on an administratively configured scheduled task.
- C. Endpoint information is updated in real time when a host status changes.
- D. Endpoint information is pulled from the managed CAs by the FortiNAC-F manager at a set interval.
Answer: C
Explanation:
In a FortiNAC-F manager and CA architecture, endpoint information is synchronized to the manager in real time as host status changes occur on the managed CAs. This ensures the manager database reflects current endpoint state without requiring manual or scheduled synchronization.
NEW QUESTION # 38
......
Give push to your success with NSE5_FNC_AD-7.6 exam questions: https://freecert.test4sure.com/NSE5_FNC_AD-7.6-exam-materials.html